We have the following equipments for repairs and testing:
 ABI
U. K. Make: 256 Channel In-Circuit Tester Model System 8. The above is state of the art equipment for testing, comparing and fault-finding. This equipment can test Analogue as well as Digital ICs in-circuit. At the same time, it can capture the signature of the reference cards and then save it to be compared at a later stage. |
 |
ABI
U.K. make M.I.S. Module.
The above is another state of the art equipment for testing and servicing.
It is PC based, and integrates the following equipments:
(1) Digital Storage Oscilloscope,
Range 80 MHZ.
(2) Frequency Meter, Range
1.2 Ghz.
(3) 2 Channel Voltage Probe,
Maximum Range: 250 V AC/DC.
(4) 8 Channel Analogue Voltage,
Output Voltage Range for each Channel is
+9.5 volt to - 9.5 Volt.
(5) DC Regulated Power Supply:
+5v, 0 to +15 V, and 0 to -15 Volts.
(6) Function Generator Sine,
Square and Triangle Level: TTL, CMOS, and
ECIL.
(7) Capacitance Meter
Stand
Alone Philips Make Oscilloscope (100 MHZ)
| Stand
Alone Testle Make Digital/Analogue IC Tester. |
 |
Stand
Alone Agronics Make DC Power Supply.
Stand
Alone Philips Make Frequency Counter (1.2 GHZ ).
Stand
Alone FET and Transistor Tester.
Stand
Alone Contact less TACHO Meter.
Set
of Digital Multimeters, and Tong Testers along with various testing
clips and probes.
Stand Alone M/s HILO from Taiwan make EPROM / PROM Programmer
and Tester.
HAKKO Japan Make Soldering and De-Soldering Tool.
Leister
Switzerland Make Hot Air Soldering and De-Soldering Tool (Especially for
SMD devices).
Along
with the above, we are maintaining a well equipped library with various
Data Books, Manuals, Diagrams (strictly for our internal use). Also, data
volumes on CD-ROMs are available from various U.S.A. publishers like IC
Master, D.A.T.A, HIS, and etc.